Getting Started - HYT TC3600 Manual

Getting Started

(
Keypad type model)
(1) Antenna
Used to transmit/receive signals.
(2) LED
The following table indicates LED mode and corresponding radio status:
Flashing green
Flashing red
Flashing orange
(3) Channel Selector
Used to select wanted channel.
(4) Programmable key [A]
(5) Power/Volume Control Knob
Rotate the Power/Volume Knob clockwise until a "click" is heard to turn the radio on;
rotate fully counter-clockwise to turn the radio off. When the radio is on, turn the knob
to adjust volume.
(6) Battery Latch
Used to fasten the battery.
(7) Speaker
Used to output receiver audio and alert tones
(8) Microphone
LED
Not lit
Green
Red
Low battery voltage
13
(Non-keypad type model)
Status
Standby
Receive
Transmit
Scan
Call waiting