Huawei SUN2000-33KTL User Manual page 67

SUN2000-(33KTL, 40KTL)
User Manual

Issue 03 (2015-12-01)
d. Connect the input end to terminals 5 and 7 on the terminal block and connect the
output end to terminals 6 and 8 on the terminal block, as shown in
Figure 5-25 Connecting RS485 communications cables
e. Bind the communications cables after connecting them, as shown in
Figure 5-26 Binding communications cables
f. Use a torque wrench to tighten the locking caps to a torque of 7.5 N· m.
Method 2: Connecting to RJ45 Ports
a. Insert the wires of the network cable to the RJ45 connector in sequence, as shown
in Figure 5-27.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
Figure 5-25.
Figure 5-26.
61