SUN2000-(33KTL, 40KTL)
User Manual
Figure 5-3 Connecting the PGND cable
----End
5.2 Opening the Maintenance Compartment Door
Prerequisites
Procedure
Step 1 Loosen the two screws on the maintenance compartment door, as shown in
screws aside for future use.
Issue 03 (2015-12-01)
To prevent corrosion, apply silica gel to the ground terminal after connecting the PGND cable.
Do not open the inverter panel.
Before opening the maintenance compartment door, ensure that the AC and DC power
supplies are disconnected. For processes of disconnecting the power supplies, see
Powering Off the
SUN2000.
Do not leave unused screws in the chassis.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
6.2
Figure
5-4. Set the
45