Huawei SUN2000-33KTL User Manual page 62

Hide thumbs Also See for SUN2000-33KTL:

Table of Contents

SUN2000-(33KTL, 40KTL)

User Manual

Figure 5-18 Installing DC input power cables

After the positive and negative connectors are in position, the clearance between the DC

terminals and connectors should be less than or equal to 0.8 mm and the DC input cables

cannot be pulled out.

----End

Follow-up Procedure

To remove the positive and negative connectors from the SUN2000, insert a removal wrench

into the bayonet and press the wrench with an appropriate force, as shown in

Before removing the positive and negative connectors, ensure that the DC SWITCH is OFF.

Issue 03 (2015-12-01)

Huawei Proprietary and Confidential

5 Electrical Connections

Figure

5-19.

Table of Contents

Sun2000-40ktl