Safety Precautions; Personnel Requirements - Huawei SUN2000-33KTL User Manual

SUN2000-(33KTL, 40KTL)
User Manual

Personnel Requirements



Label Protection



Installation
Read this document before installation. Huawei shall not be liable for any consequence
caused by violation of the regulations specified in this document.




Issue 03 (2015-12-01)
Only qualified and trained electrical technicians are allowed to install and operate the
SUN2000.
Operators should understand the components and functioning of a grid-tied PV power
system, and they should be familiar with relevant local standards.
Do not tamper with any warning signs on the SUN2000 enclosure because these signs
contain important information about safe operation.
Do not remove or damage the nameplate on the SUN2000 enclosure because it contains
important product information.
Do not remove the anti-dismantle label on the SUN2000 enclosure because it is the basis
for product warranty.
Ensure that the SUN2000 is not connected to a power supply and is not powered on
before starting installation.
Ensure that there are no objects within 200 mm of both sides of the SUN2000, and no
objects within 500 mm, 600 mm, and 1000 mm of the top, bottom, and front,
respectively. This is to allow sufficient space for installation and heat dissipation. If you
have any questions about the distance, consult the local technical support engineers.
Install the SUN2000 in an environment with good ventilation to ensure efficient and
long-term system performance.
Ensure that the SUN2000 heat sinks are free from blockage.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1

Safety Precautions

1 Safety Precautions
1