Environmental Specifications - Hitachi F800 Hardware Reference Manual

Environmental specifications

Temperature
Caution: The following VSP Gx00/Fx00 storage system components are not
supported in high-temperature environments. Do not operate the following
components at temperatures of 40°C or higher:
• DB60 dense drive tray
• HDS provided service processor (SVP) server
• First-generation FMDs (non-DC2 FMDs)
Operating
Non-operating
Transport, storage -22°F to 140°F
Temperature
change rate
(°C/h)
Humidity
Operating
Non-operating
Transport, storage (%)
Maximum wet bulb temperature (°C)
Vibration
Operating
Non-operating
72
State Controller
50°F to 104°F
(10°C to 40°C)
14°F to 122°F
(-10°C to 50°C)
(-30°C to 60°C)
10 or less
State
State
Environmental specifications for VSP F800
Hitachi Virtual Storage Platform F800 Hardware Reference Guide
FMD drive trays
DKC-F810I-1R6FN/3R2FN/6R4FN/7R0FP/14RFP drive is
installed: 50°F to 104°F (10°C to 40°C)
14°F to 95°F (-10°C to 35°C)
-22°F to 122°F (-30°C to 50°C)
8 to 80
8 to 90
5 to 95
29 (non-condensing)
2.5 or less
Within 5 seconds (resonance point: 10 Hz or
less)
5.0 or less at 5 Hz to 300 Hz (no damage to
product)
9.8 (1.0 G)
Within 5 seconds (resonance point: 10 Hz or
less)
Percentage
2
m/s