Electrical Specifications - Hitachi F800 Hardware Reference Manual

Electrical specifications

Frequency (Hz)
Number of phases, cabling
Steady-state current 100V/
200V
Current rating of breaker/fuse
(A)
Heat value (normal) (kJ/h)
Steady-state power (VA/W)
Power consumption (VA/W)
Notes:
70
Item
1 2
,
1. The power current of Nx2 described in this table is required for a single power unit.
2. If one power unit fails, another power unit requires electric current for the two power units.
Therefore, plan the power supply facility so that the current-carrying capacity for one power
unit can provide the total capacity for two power units.
3. This table shows the power requirement (100 V or 200 V) for the maximum configuration .
The actual required power might exceed the value shown in the table when the tolerance is
included.
Electrical specifications for VSP F800
Hitachi Virtual Storage Platform F800 Hardware Reference Guide
Controller
Single-phase with protective grounding
CBLH: 4.0x2
2810 or less
3 CBLH: 1600/1560 or less
CBLH: 840/780 or less
Drive tray
50/60 ±1
FMD drive tray: 2.6x2/1.3x2
16.0 (each electrical)
FMD drive tray: 1520 or less
FMD drive tray: 1520 or less
FMD drive tray: 520/490 or less
FMD drive tray: 440/420 or less