1.
INTRODUCTION
1.1
General
The PXD split floor and ceiling units range comprise the ST (cooling only) and RC (heat
pump) models, as follows:
Cooling Only
•
Heat Pump
•
1.2
Main Features
The PXD series benefits from the most advanced technological innovations, namely :
R410A
•
Microprocessor control.
•
Infrared remote control, and on unit.
•
Possibility for treated air distribution to adjacent room (
•
High COP.
•
Easy access to the interconnecting tubing and wiring connections.
•
Possibility to connect a condensate pump kit with an integral over flow
•
protection (
Automatic treated air sweep (horizontal and vertical)
•
Low indoor and outdoor noise levels.
•
Easy installation and service.
•
1.3
Indoor Unit
The indoor unit can be mounted as floor or ceiling type, no special adjustment
are needed. it can be easily fitted to many types of residential and commercials
applications.
It includes:
Casing with inlet and outlet grilles.
•
Motorized flaps (Horizontal and vertical).
•
Advanced electronic control box assembly (storm 10V7).
•
Coated indoor coil.
•
Mounting plate
•
1.4
Filtration
The PXD series presents several types of air filters:
Easily accessible, and re-usable pre-filters (mesh)
•
Active carbon filter.
•
SM PXD 1-E.3 GB
PXD9ST
PXD12ST
PXD18ST
PXD24ST
PXD9RC
PXD12RC
PXD18RC
PXD24RC
.
Accessory kit)
CONTENT
INTRODUCTION
PXD15ST
PXD30ST
PXD15RC
PXD30RC
Accessory kit).
1-1