Electra PXD912 Service Manual page 151

OPTIONAL ACCESSORIES
All Season Kit Installation Instruction(for ST units only)
Switch off power supply to the unit
Fig.1
● Remove:
– Cover A;
– Power panel handle B;
– Side cover C (if it exist).
Fig.2
● Mount the Fan speed controller on the partition
of the compressor compartment in the holes pro-
vided, using four supplied screws .
Note:
● In outdoor models OU8, the Fan Speed Control-
ler should be mounted on the partition toward the
outdoor fan motor side.
Fig.3
● Unscrew the cap of the provided service valve D
and connect to the T-valve, supplied in the kit.
Use Copper sealing gasked between the flare nut
and it's connection to service valve D.
Note:
● The "T-valve" supplied in the kit is installed be-
tween valve D and capillary E offering the possi-
bility of an additionall pressure connecting output
for service.
14-4
OU7
OU8
Additional pressure
output
1
CONTENT
A
B
C
Fig.1
OU10
Fig.2
Service valve
cap
T-valve
D
Fig.3
SM PXD 1-E.3 GB
E