Replacing A Turn Signal Light Bulb - Yamaha XT250L 2014 Owner's Manual

1
1. Tail/brake light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
[ECA10682]
PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1
2
1. Screw
2. Turn signal light lens
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
7-33
EAU24205
1
1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
1
2
3
4
5
6
7
8
[ECA11192]
9
10
11
12