Cleaning And Lubricating The Drive Chain; Checking And Lubricating The Cables - Yamaha XT250L 2014 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1
Cleaning and lubricating the
drive chain
2
The drive chain must be cleaned and
lubricated at the intervals specified in
the periodic maintenance and lubrica-
3
tion chart, otherwise it will quickly wear
out, especially when riding in dusty or
4
wet areas. Service the drive chain as
follows.
5
NOTICE
The drive chain must be lubricated
6
after washing the motorcycle, riding
in the rain or riding in wet areas.
7
1. Clean the drive chain with kero-
sene and a small soft brush.
8
NOTICE: To prevent damaging
the O-rings, do not clean the
9 drive chain with steam cleaners,
high-pressure washers or inap-
propriate solvents.
10
2. Wipe the drive chain dry.
3. Thoroughly lubricate the drive
11
chain with a special O-ring chain
lubricant. NOTICE: Do not use
engine oil or any other lubri-
12
cants for the drive chain, as they
EAU23026 may contain substances that
could damage the O-rings.
ECA10584
[ECA11122]
Checking and lubricating the
[ECA11112]
cables
The operation of all control cables and
the condition of the cables should be
checked before each ride, and the ca-
bles and cable ends should be lubricat-
ed if necessary. If a cable is damaged
or does not move smoothly, have a
Yamaha dealer check or replace it.
WARNING! Damage to the outer
housing of cables may result in in-
ternal rusting and cause interfer-
ence with cable movement. Replace
damaged cables as soon as possi-
ble
tions.
7-24
to prevent unsafe
[EWA10712]
Recommended lubricant:
Yamaha cable lubricant or other suit-
able cable lubricant
EAU23098
condi-