Indicator Lights And Warning Lights - Yamaha XT250L 2014 Owner's Manual

To unlock the steering
1
2
1. Push.
2. Turn.
Push the key into the main switch, and
then turn it to "OFF" while still pushing
it.
INSTRUMENT AND CONTROL FUNCTIONS
Indicator lights and warning
lights
1 2 3 4
1. Engine trouble warning light "
2. Turn signal indicator light "
3. Fuel level warning light " "
4. High beam indicator light "
5. Neutral indicator light " "
Turn signal indicator light "
This indicator light flashes when the
turn signal switch is pushed to the left or
right.
Neutral indicator light "
This indicator light comes on when the
transmission is in the neutral position.
4-2
EAU49396
High beam indicator light "
This indicator light comes on when the
high beam of the headlight is switched
on.
5
Fuel level warning light " "
This warning light comes on when the
fuel level drops below approximately
1.8 L (0.48 US gal, 0.40 Imp.gal). When
this occurs, refuel as soon as possible.
The electrical circuit of the warning light
can be checked by turning the key to
"
"ON". The warning light should come
"
on for a few seconds, and then go off.
If the warning light does not come on
"
initially when the key is turned to "ON",
or if the warning light remains on, have
a Yamaha dealer check the electrical
EAU11021
circuit.
"
Engine trouble warning light "
This warning light comes on if a prob-
lem is detected in the electrical circuit
EAU11061
monitoring the engine. If this occurs,
"
have a Yamaha dealer check the
self-diagnosis system.
The electrical circuit of the warning light
EAU11081
1
"
2
3
EAU11354
4
5
6
7
8
9
EAU11485
10
"
11
12