Yamaha XT250L 2014 Owner's Manual page 51

element.
1. Oil filter element drain bolt
TIP
Skip steps 6–8 if the oil filter element is
not being replaced.
6. Remove the oil filter element cover
by removing the bolts.
PERIODIC MAINTENANCE AND ADJUSTMENT
1
1. Oil filter element cover bolt
2. Oil filter element cover
7. Remove and replace the oil filter
element and O-rings.
TIP
Make sure that the O-rings are properly
seated.
1
2
1. O-ring
2. Oil filter element
10. Install the oil filter element drain
7-13
1
1
8. Install the oil filter element cover by
installing the bolts, and then tight-
en the bolts to the specified torque.
Tightening torque:
Oil filter element cover bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
9. Install the engine oil drain bolt and
its new gasket, and then tighten
the bolt to the specified torque.
Tightening torque:
Engine oil drain bolt:
20 Nm (2.0 m·kgf, 14 ft·lbf)
bolt, and then tighten the bolt to the
1
2
3
2
4
5
6
7
8
9
10
11
12