Handlebar Switches - Yamaha XT250L 2014 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
This model is equipped with a self-diag-
1
nosis device for various electrical cir-
cuits.
2
If a problem is detected in any of those
circuits, the display will indicate an error
code.
3
If the display indicates such an error
code, note the code number, and then
4
have a Yamaha dealer check the vehi-
cle.
5
NOTICE
If the display indicates an error
6
code, the vehicle should be checked
as soon as possible in order to avoid
7
engine damage.
8
9
10
11
12

Handlebar switches

Left
ECA11591
1. Dimmer switch "
2. Turn signal switch "
3. Horn switch "
Right
1
2
1. Engine stop switch "
2. Start switch " "
EAU1234H
Dimmer switch "
Set this switch to "
beam and to "
Turn signal switch "
1
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
2
leased, the switch returns to the center
3
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
/ "
/ "
"
Horn switch "
Press this switch to sound the horn.
Engine stop switch "
Set this switch to "
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
Start switch " "
/ "
Push this switch to crank the engine
4-5
EAU12401
/ "
" for the high
" for the low beam.
EAU12461
/ "
". To signal a left-hand
". When re-
EAU12501
"
EAU12661
/ "
" before starting
" to
EAU12713