Cleaning And Lubricating The Drive Chain - Yamaha MT-09 Owner's Manual

Periodic maintenance and adjustment
4. Make sure that the drive chain
pullers are in the same position,
the drive chain slack is correct,
and the drive
smoothly.
9
Cleaning and lubricating the
drive chain
The drive chain must be cleaned and
chain moves
lubricated at the intervals specified in
the periodic maintenance and lubrica-
tion chart, otherwise it will quickly wear
out, especially when riding in dusty or
wet areas. Service the drive chain as
follows.
NOTICE
The drive chain must be lubricated
after washing the motorcycle, riding
in the rain or riding in wet areas.
1. Clean the drive chain with a drive
chain cleaner and a small soft
brush. NOTICE: To prevent dam-
aging the O-rings, do not clean
the drive chain with steam
cleaners, high-pressure wash-
ers or inappropriate solvents.
[ECA11122]
2. Wipe the drive chain dry.
3. Thoroughly lubricate the drive
chain with a special O-ring chain
lubricant. NOTICE: Do not use
engine oil or any other lubri-
EAU23027
ECA10584
9-24
cants for the drive chain, as they
may contain substances that
could damage the O-rings.
[ECA11112]