Static Control Mode; Slave Mode; Dmx Channels / Dmx Address - SHOWTEC 43161 Manual

Magician LED

3. Static Control Mode

With this menu you can manually set a desired color and set the strobe function.
01) Press the Mode button until the display shows
02) Press the Enter button to open this menu.
03) Repeatedly press the Enter button to scroll through the 4 color options and the strobe function.
04) Press the Up and Down buttons to change the values.
You can combine Red, Green, Blue and UV to create an infinite range of colors (0-255).

4. Slave mode

With this menu you can set the device as a Slave.
01) Press the Mode button until the display shows
02) Press the Enter button to activate the slave mode, the display shows
03) If the device has not been set to slave, it is automatically classified as a master device. All slave
devices will follow the master movement. If the device has been set to slave, it will react the same as
its master device.

5. DMX Channels / DMX Address

With this menu you can choose a DMX configuration and set the DMX address.
01) Press the Mode button until the display shows
02) Press the Enter button to open this menu.
03) Press the Up and Down buttons to choose the desired DMX configuration.
04) Once you have chosen the desired DMX configuration press the Enter button to set the DMX
address.
05) Press the Up and Down buttons to select the required address.
06) Each DMX configuration has a different maximum number of DMX addresses.
Ordercode: 43161
Gradual adjustment red intensity(0-255)
Gradual adjustment green intensity (0-255)
Gradual adjustment blue intensity (0-255)
Gradual adjustment UV intensity (0-255)
Strobe speed from slow to fast
.
.
.
19
.