Warning Labels - Furuno NavNet 3D MFDBB Operator's Manual

WARNING
Do not subject the units other than the
antenna unit to rain or water splash.
Fire or electrical shock can result if water
gets inside the equipment.
Do not disassemble or modify the
equipment.
Fire or electrical shock can result if the
equipment is modified.
Do not place liquid-filled containers on
the top of the processor unit.
WARNING
Fire or electrical shock can result if a liquid
spills into the processor unit.
Do not operate the equipment with wet
hands.
Electrical shock can result.

Warning Labels

Warning labels are attached to the equipment.
Do not remove any label. If a label is missing
or damaged, contact a FURUNO agent or
dealer about replacement.
No one navigation device should ever be
solely relied upon for the navigation of
the vessel.
Always confirm position against all
available aids to navigation, for safety
of vessel and crew.
A radar is useful as an anti-collision aid.
However, it does not remove the require-
ment for maintaining a vigilant watch.
Always maintain a vigilant watch while
underway.
Do not leave ropes or other objects
in the vicinity of the antenna unit.
Fire, electrical shock or injury can result if
an object becomes entangled in the antenna
unit.
Use the correct fuse.
Use of an incorrect fuse can cause fire
or serious damage to the equipment.
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
WARNING
Radiation hazard. Only qualified
personnel should work inside scanner.
Confirm that TX has stopped before
opening scanner.
Safety Instructions
WARNING
Name: Warning Label 1
Type: 86-003-1011-1
Code No.: 100-236-231
Name: Warning Sticker
Type: 3-142-3201-0
Code No.: 100-266-890
iii