Technical Specifications; Switch Specifications; Switch Specifications For Cisco Mds 9706 Director - Cisco MDS 9700 Series Hardware Installation Manual

Technical Specifications

This chapter provides technical specifications and includes the following sections:
•
•
•
•
•

Switch Specifications

Note
The following table lists the environmental specifications for the Cisco MDS 9700 Series.
Table 21: Environmental Specifications for the Cisco MDS 9700 Series
Description
Temperature, certified for operation
Temperature, ambient non operating and storage
Humidity (RH), ambient (non condensing) operating
Humidity (RH), ambient (non condensing) non
operating and storage
Altitude, certified for operation
This section contains the switch specifications for the following models:

Switch Specifications for Cisco MDS 9706 Director

The following table lists the physical specifications for the Cisco MDS 9706 Director.
Switch Specifications, on page 181
Module Specifications, on page 183
Power Specifications, on page 188
Component Power Requirements and Heat Dissipation, on page 189
SFP+ Transceiver Specifications, on page 196
These equipment are designed to boot up in less than 30 minutes, depending on its neighboring devices be
fully up and running.
C H A P T E R
Specification
32 to 104°F (0 to 40°C)
–40 to 158°F (–40 to 70°C)
10 to 90%
10 to 95%
–197 to 6500 ft (–60 to 2000 m)
Cisco MDS 9700 Series Switches Hardware Installation Guide
7
181