Toshiba B-FV4D-GS12-QM-R Owner's Manual page 63

6 Specifications
8) Return the 6 connectors to the original positions, which were removed in Step 3.
9) Fix the Bottom Cover by securing the 4 screws which were removed in Step 2.
Note: When fitting the Bottom Cover, prevent the harness from being trapped between the
covers.
10) Peel off the backing sheet of the RF Certification Label and attach it to the position as
shown below.
Note:
Be sure not to cover the contents described on the rating label when the RF Certification Label
is attached to the upper right corner.
11) Close the Top Cover.
The installation is now completed.
© 2015 TOSHIBA TEC CORPORATION All Rights Reserved
1‐11‐1, Osaki, Shinagawa‐ku, Tokyo 141‐8562, JAPAN
RF Certification Label
Rating Label
‐ 54 ‐
Interfaces