Ford FUSION HYBRID 2017 Owner's Manual page 95

Low Fuel Level
Lights when the fuel level is low
or the fuel tank is nearly empty.
Refuel as soon as possible.
Low Tire Pressure Warning
Lights when your tire pressure is
low. If the lamp remains on with
the engine running or when
driving, check your tire pressure as soon as
possible.
To confirm the lamp is working, it will also
light momentarily when you switch on the
ignition. If it does not light when you switch
on the ignition, or it begins to flash at any
time, have an authorized dealer check the
system.
Parking Lamps
Lights when you switch on the
parking lamps.
Powertrain Fault
Lights when your vehicle detects
a powertrain fault. Contact an
authorized dealer as soon as
possible.
Note: If your vehicle detects certain faults,
it will not allow you to operate the
accelerator pedal. If this happens, press the
brake pedal and release it. This will activate
limp home vehicle operation. In limp home
vehicle operation, your vehicle will
accelerate in a controlled manner up to a
maximum speed of 35 mph (56 km/h) on
a flat surface. If you apply the brake pedal
or move the transmission to neutral (N) you
can override your vehicle s acceleration.
Fusion Energi / Fusion Hybrid (CC7) Hybrid Electric Vehicle (HEV)/Plug-In Hybrid Electric Vehicle (PHEV), Canada/United States of America, enUSA, Edition date: 201602, Second Printing
Instrument Cluster
Ready to Drive
E144692
may appear stating ready to drive.
Service Engine Soon
the On Board Diagnostics system (OBD)
has detected a malfunction of the vehicle
emissions control system. Refer to On
board diagnostics (OBD) in the Fuel and
Refueling chapter for more information
about servicing your vehicle. See
Emission Control System (page 159).
If the light is blinking, the engine is misfiring.
This could damage your catalytic
converter. Drive in a moderate fashion
(avoid heavy acceleration and
deceleration) and have an authorized
dealer service your vehicle immediately.
Note: If your engine is misfiring, excessive
exhaust temperatures can damage the
catalytic converter or other vehicle
components.
The service engine soon indicator lights
when the you first switch on your vehicle,
prior to engine start, to check the bulb and
to indicate whether the vehicle is ready for
inspection maintenance testing.
Normally, the service engine soon light will
stay on until the engine cranks, then turn
itself off if no malfunctions are present.
However, if after 15 seconds the service
engine soon light blinks eight times, it
means that the vehicle is not ready for
inspection maintenance testing. See
Emission Control System (page 159).
92
Lights when you have switched
on the vehicle and it is ready to
drive. A corresponding message
If the service engine soon
indicator light stays lit after you
start the engine, it indicates that