Table of Contents
Advertisement
Horizontal Aim Adjustment
REMOVING A HEADLAMP
E159693
Note: To remove push pins, use a
flat-bladed screwdriver to pull up the center
release pin.
1.
Make sure the headlamp control is in
the off position and open the hood.
2. Remove the six push pins securing the
front fascia to the front trim cover.
3. Remove the three bumper cover upper
screws using a flat-bladed screwdriver.
4. Remove the push pin at the inboard
side of the headlamp you are servicing.
Fusion Energi / Fusion Hybrid (CC7) Hybrid Electric Vehicle (HEV)/Plug-In Hybrid Electric Vehicle (PHEV), Canada/United States of America, enUSA, Edition date: 201602, Second Printing
Maintenance
Horizontal aim is not required for this
vehicle and is not adjustable.
E159694
5. Remove the two screws securing the
headlamp using a flat-bladed
screwdriver.
264
Advertisement
Table of Contents
Troubleshooting
