Ford FUSION HYBRID 2017 Owner's Manual page 219

radar, the Pre-Collision Assist system does
not function and cannot detect a vehicle
ahead. With the front camera obstructed,
the Pre-Collision Assist system does not
respond to pedestrians or stationary
The surface of the radar in the grille is dirty
or obstructed in some way.
The surface of the radar in the grille is clean
but the message remains in the display.
Heavy rain, spray, snow, or fog is interfering
with the radar signals.
Swirling water, or snow or ice on the surface
of the road may interfere with the radar
signals.
Radar is out of alignment due to a front end
impact.
The windshield in front of the camera is
dirty or obstructed in some way.
The windshield in front of the camera is
clean but the message remains in the
display.
Note: Proper system operation requires a
clear view of the road by the camera. Have
any windshield damage in the area of the
camera's field of view repaired.
Note: If something hits the front end of your
vehicle or damage occurs, the radar sensing
zone may change. This could cause missed
or false vehicle detections. Contact an
authorized dealer to have the radar checked
for proper coverage and operation.
Fusion Energi / Fusion Hybrid (CC7) Hybrid Electric Vehicle (HEV)/Plug-In Hybrid Electric Vehicle (PHEV), Canada/United States of America, enUSA, Edition date: 201602, Second Printing
Driving Aids
Cause
vehicles and the system performance on
moving vehicles reduces. The following
table lists possible causes and actions for
when this message displays.
Clean the grille surface in front of the radar
or remove the object causing the obstruc-
Wait a short time. It may take several
minutes for the radar to detect that there
is no obstruction.
The Pre-Collision Assist system is tempor-
arily disabled. Pre-Collision Assist should
automatically reactivate a short time after
the weather conditions improve.
The Pre-Collision Assist system is tempor-
arily disabled. Pre-Collision Assist should
automatically reactivate a short time after
the weather conditions improve.
Contact an authorized dealer to have the
radar checked for proper coverage and
operation.
Clean the outside of the windshield in front
of the camera.
Wait a short time. It may take several
minutes for the camera to detect that there
is no obstruction.
Note: If your vehicle detects excessive heat
at the camera or a potential misalignment
condition, a message may display in the
information display indicating temporary
sensor unavailability. This message
deactivates automatically when operational
conditions are corrected (for example, when
the ambient temperature around the sensor
decreases or the sensor automatically
recalibrates successfully).
216
Action
tion.