Using Mykey With Remote Start Systems; Mykey Troubleshooting - Ford FUSION HYBRID 2017 Owner's Manual

USING MYKEY WITH REMOTE
START SYSTEMS
MyKey is not compatible with non

MYKEY TROUBLESHOOTING

Condition
I cannot create a MyKey.
I cannot program the configurable settings.
For vehicles with keyless start: No MyKey
restrictions are available when starting the
vehicle.
I cannot clear the MyKeys.
I lost the only admin key.
I lost a key.
MyKey distances do not accumulate.
Fusion Energi / Fusion Hybrid (CC7) Hybrid Electric Vehicle (HEV)/Plug-In Hybrid Electric Vehicle (PHEV), Canada/United States of America, enUSA, Edition date: 201602, Second Printing
MyKey
Ford-approved, aftermarket remote start
systems. If you choose to install a remote
start system, see an authorized dealer for
a Ford-approved remote start system.
· The key or transmitter used to start the
vehicle does not have admin privileges.
· Vehicles with keyless start: Make sure you
place the transmitter into the backup posi-
tion. See Starting a Gasoline Engine
(page 142).
· The key or transmitter used to start the
vehicle is the only admin key. There always
has to be at least one admin key.
· SecuriLock passive anti-theft system is
disabled or in unlimited mode.
· The key or transmitter used to start the
vehicle does not have admin privileges.
· There are no MyKeys programmed to the
vehicle. See Creating a MyKey (page 55).
· An admin transmitter is present when you
started your vehicle.
· There are no MyKeys programmed to the
vehicle. See Creating a MyKey (page 55).
· The key or transmitter used to start the
vehicle does not have admin privileges.
· No MyKeys are created. See Creating a
MyKey (page 55).
· Purchase a new key or transmitter from
your authorized dealer.
· Program a spare key or transmitter. You
may need to see your authorized dealer.
See Passive Anti-Theft System (page
65).
· The MyKey user is not using the MyKey.
· An admin key holder cleared the MyKeys
and created new MyKeys.
· The key system has been reset.
57
Potential causes