Ford FUSION HYBRID 2017 Owner's Manual page 112

Hill Start Assist
Message
Hill Start Assist Not
Available
Keys and Intelligent Access
Message
To START Press Brake
No Key Detected
Restart Now or Key is
Needed
Accessory Power is
Active
Starting System Fault
Key Program Successful
Key Program Failure
Max Number of Keys
Learned
Not Enough Keys
Learned
Key Battery Low Replace
Soon
Could Not Program
Integrated Key
Vehicle is ON
Fusion Energi / Fusion Hybrid (CC7) Hybrid Electric Vehicle (HEV)/Plug-In Hybrid Electric Vehicle (PHEV), Canada/United States of America, enUSA, Edition date: 201602, Second Printing
Information Displays
Hill start assist is not available. Contact an authorized dealer.
See Hill Start Assist (page 177).
A reminder to press the brake while starting your vehicle.
The system does not detect a key in your vehicle. See Keyless
Starting (page 141).
You pressed the start/stop button to switch off the engine
and your vehicle does not detect your intelligent access key
inside your vehicle.
Your vehicle is in the run ignition state.
There is a problem with your vehicle's starting system. See
an authorized dealer for service.
You have successfully programmed an intelligent access key
to the system.
You have failed to program an intelligent access key to the
system.
You have programmed the maximum number of keys to the
system.
You have not programmed enough keys to the system.
The key battery is low. Change the battery as soon as possible.
An attempt is made to program a spare key using two existing
MyKeys.
Informs you that upon exiting your vehicle that the vehicle is
still on.
109
Action
Action