Safety Label On The Instrument; Eu Conformity; Fulfillment Of Namur Recommendations; Installation And Operation In The Usa And Canada - Vega VEGADIF 65 Operating Instructions Manual

Differential pressure transmitter with metallic measuring diaphragm
Table of Contents

Advertisement

2 For your safety
6
trary conversions or modifications are explicitly forbidden. For safety
reasons, only the accessory specified by the manufacturer must be
used.
To avoid any danger, the safety approval markings and safety tips on
the device must also be observed and their meaning looked up in this
operating instructions manual.
2.5

Safety label on the instrument

The safety approval markings and safety tips on the device must be
observed.
2.6

EU conformity

The device fulfils the legal requirements of the applicable EU direc-
tives. By affixing the CE marking, we confirm the conformity of the
instrument with these directives.
You can find the EU conformity declaration on our website under
www.vega.com/downloads.
2.7 Fulfillment of NAMUR recommendations
NAMUR is the automation technology user association in the process
industry in Germany. The published NAMUR recommendations are
accepted as the standard in field instrumentation.
The device fulfils the requirements of the following NAMUR recom-
mendations:
NE 21 – Electromagnetic compatibility of equipment
NE 43 – Signal level for fault information from measuring transduc-
ers
NE 53 – Compatibility of field devices and display/adjustment
components
For further information see www.namur.de.
2.8
Installation and operation in the USA and
Canada
This information is only valid for USA and Canada. Hence the follow-
ing text is only available in the English language.
Installations in the US shall comply with the relevant requirements of
the National Electrical Code (ANSI/NFPA 70).
Installations in Canada shall comply with the relevant requirements of
the Canadian Electrical Code
2.9

Safety instructions for oxygen applications

For instruments in oxygen applications the special instructions in
chapters "Storage and transport", "Mounting" as well as "Technical
data" under "Process conditions"must be noted. Furthermore the valid
national regulations, implementation instructions and memorandums
of the professional assocations must be noted.
VEGADIF 65 • 4 ... 20 mA

Advertisement

Table of Contents
loading

Table of Contents