Sequence Output Instructions - Omron CS1G/H-CPUxxH Instructions Manual

Sequence Output Instructions

3-4 Sequence Output Instructions
3-4-1 OUTPUT: OUT
Purpose
Ladder Symbol
Variations
Applicable Program Areas
Operand Specifications
166
In the following example, CIO 000001 is turned ON when CIO 000000 is ON
or bit 3 of D00010 is OFF.
Outputs the result (execution condition) of the logical processing to the speci-
fied bit.
Variations Executed Each Cycle for ON Condition
Executed Once for Upward Differentiation
Executed Once for Downward Differentiation
Immediate Refreshing Specification (See note.)
Note Immediate refreshing is not supported by the CS1D CPU Units.
Block program areas
Not allowed
Area
CIO Area
Work Area
Holding Bit Area
Auxiliary Bit Area
Timer Area
Counter Area
TR Area
DM Area
EM Area without bank
EM Area with bank
Indirect DM/EM
addresses in binary
Indirect DM/EM
addresses in BCD
Constants
Data Registers
&3
Step program areas Subroutines
OK OK
OUT bit operand
CIO 000000 to CIO 614315
W00000 to W51115
H00000 to H51115
A44800 to A95915
---
---
TR0 to TR15
---
---
---
---
---
---
---
Section 3-4
OUT
Not supported.
Not supported.
!OUT
Interrupt tasks
OK