Fujitsu fi-590PRF Operator's Manual page 5

This symbol alerts the operator to useful advice on
HINT
operating the device.
The triangle indicates that special care and
attention is required.
A drawing inside the triangle shows what specific
caution.
A circle with a slanted line through it indicates an
action or step that should not be performed.
Outline characters on a colored background show
R
instructions that users should follow.
It may also include the drawing of the specific
instruction.
Screen Examples In This Manual
The screen examples in this manual are subject to
change without notice in the interest of product
improvement.
If your displayed screen differs from the screen
examples in this manual, operate by following your
actual displayed screen while referring to the User's
Manual of the scanner application you are using.
The screenshots used in this manual are for Windows,
TWAIN Driver.
The Operator Panel Language Display
Apart from English, the operator panel can also
display French, German, Italian, Spanish, and
Chinese (Simplified). In this manual, the language
display of the operator panel is shown in English.
About Maintenance
The user must not perform repairs on this product.
Contact the store where you purchased the scanner or
an authorized FUJITSU Image Scanner service
provider to have repairs made on this product.
Safety Precautions
The following describes important warnings for using this
product.
For the safe use of this product, make sure to follow the
following descriptions.
WARNING
Do not insert or drop any foreign objects (water,
liquids, small metal objects, etc.) into the opening
sections on the scanner.
If foreign objects get inside the scanner, immediately
disconnect the power cable from the AC outlet.
Then, contact your FUJITSU scanner dealer or an
authorized FUJITSU scanner service provider. Pay
particular attention to this warning in households
where there are small children.
If the scanner is damaged for any reason,
immediately disconnect the power cable from the AC
outlet. Then, contact your FUJITSU scanner dealer
or an authorized FUJITSU scanner service provider.
In the following situation, immediately disconnect the
power cable from the AC outlet. Not doing so may
cause a fire or electric shock.
●
Smoke or heat coming from the scanner is
detected.
●
Strange noise or smell is detected.
●
Foreign objects (water, liquids, small metal
objects, etc.) get inside the scanner.
●
Other problems which indicate a scanner failure
are detected.
Then, contact your FUJITSU scanner dealer or an
authorized FUJITSU scanner service provider.
Never try fixing such problems by yourself. Doing so
is dangerous.
Do not take apart or modify the scanner as
high-voltage components inside the scanner are
dangerous. PFU assumes no liability to any damage
caused by taking apart the scanner, as doing so is
not covered under the warranty.
The area around the part to which this warning label
is affixed can become very hot.
To avoid burns, never touch around the area
indicated by this label.
Firmly insert the power cable into the AC outlet. Not
doing so may cause a fire or electric shock.
Use the scanner only at the indicated power voltage
and current. Do not connect to multiple-power strips.
Improper power voltage or current might cause a fire
or electric shock.
Use only power cables provided with the scanner. Do
not use any extension cords. Not following these
instructions may cause abnormal heat or a fire. Do
not also use the power cable provided with the
scanner for other devices, since this might cause
problems such as an equipment failure, or an electric
shock.
Do not install in places that are damp or subject to
smoke, steam, or dust, as this may cause a fire or
electric shock.
fi-590PRF Imprinter Operator's Guide | 3