Download  Print this page

Replacing The Print Cartridge - Fujitsu fi-590PRF Operator's Manual

Imprinter
Hide thumbs

Advertisement

2.6 Replacing the Print Cartridge

Make sure that you turn off the scanner
power and unplug the power cable from the
outlet.
CAUTION
If the cartridge replacement is done with
power turned on, it may cause electric shock
or imprinter failure.
Replace the Print Cartridge as follows:
When the following message appears, replace
ATTENTION
the Print Cartridge as soon as possible.
If you continue to print without replacing the
cartridge, your print output will continue to
appear lighter and lighter.
When installing or replacing the print cartridge,
be careful not to insert it out of place.
1.
Turn off the Scanner.
2.
Open the imprinter cover.
3.
Move the Print cartridge holder to where the
cartridge can be removed easily.
10 |
4.
5.
6.
Imprinter cover
7.
Turn the blue lever toward left and open the
cartridge holder.
Take out the Print cartridge from the holder.
Take the new Print Cartridge out of its pouch and
detach the protection tape from the Print
Cartridge.
Do not touch the metal part of the cartridge
ATTENTION
nor put the tape back again.
Insert the Print Cartridge.
Insert the cartridge with its Tab positioned
HINT
toward left side and install it.
Be careful not to let the print cartridge touch
or catch on to the print circuit film.

Advertisement

Table of Contents
loading

  Also See for Fujitsu fi-590PRF

  Related Manuals for Fujitsu fi-590PRF