Download  Print this page

General Instructions - KitchenAid 4KB25G1XBU3 Instructions & Recipes

Bowl-lift stand mixer
Hide thumbs

Advertisement

Table of Contents
Hinged
Hub Cover
Attachment
Hub Socket
‡Not part of mixer.
To Attach
1. Turn speed control to OFF.
2. Unplug stand mixer.
3. Loosen attachment knob by
turning it counterclockwise.
4. Flip up hinged hub cover.
5. Insert attachment shaft housing
into attachment hub, making
certain that attachment power
shaft fits into square attachment
hub socket. It may be necessary
to rotate attachment back and
forth. When attachment is in
proper position, the pin on the
attachment will fit into the
notch on the hub rim.
6. Tighten attachment knob by
turning clockwise until
attachment is completely
secured to stand mixer.
Attachment
Knob
®
Notch

General Instructions

Attachment
Power Shaft‡
Pin
Attachment Shaft
Housing
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
7. Plug into a grounded 3 prong
outlet.
To Remove
1. Turn speed control to OFF.
2. Unplug stand mixer.
3. Loosen attachment knob by
turning it counterclockwise.
Rotate attachment slightly back
and forth while pulling out.
4. Replace attachment hub cover.
Tighten attachment knob by
turning it clockwise.
12
Attachment
Housing

Advertisement

Table of Contents
loading

  Related Manuals for KitchenAid 4KB25G1XBU3