Accessories - General Instructions - KitchenAid K45SS Use And Care Manual

Accessories
General Information
KitchenAid :"_ Accessories are designed to assure long life. The accessory power shaft and
hub socket are of a square design, to eliminate any possibility of slipping during the
transmission of power to the accessory.The hub and shaft housing are tapered to assure
a snug fit, even after prolonged use and wear. KitchenAid _R Accessories require no extra
power unit to operate them; the power unit is built-in.
See the Stand Mixer Attachments Use and Care Guide for speed settings and operating
times.
Accessory
..... Knob Accessory
/ Power Shafts
Accessory
/
Hub Socket _ I Accessory
., .ous,ng
_t Not part of Accessory Shaft
Stand Mixer.
Housing
General Instructions
To Attach
1. Turn speed control to "0."
2. Unplug Stand Mixer or disconnect
power.
3. Loosen accessory knob by turning it
counterclockwise. Remove accessory
hub cover.
4. Insert accessory shaft housing into
accessory hub, making certain that
accessory power shaft fits into square
accessory hub socket. It may be
necessary to rotate accessory back and
forth. When accessory is in proper
position, the pin on the accessory will
fit into the notch on the hub rim.
5. Tighten accessory knob by turning
clockwise until accessory is completely
secured to Stand Mixer.
Electrical Shock Hazard
Plug into a grounded outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
6. Plug into proper electrical outlet.
18