Queues 1 and 2 in WRR group 2 are scheduled according to their weights when all other queues
•
are empty.
Configuring a queue scheduling profile
You can modify the scheduling parameters in a queue scheduling profile already applied to an interface.
The modification takes effect immediately.
To configure a queue scheduling profile:
Step
1.
Enter system view.
2.
Create a queue scheduling
profile and enter queue
scheduling profile view.
3.
Configure queue scheduling
parameters.
4.
Return to system view.
5.
Enter Ethernet interface view.
6.
Apply the queue scheduling
profile to the interface.
Displaying and maintaining queue scheduling profiles
Execute display commands in any view.
Task
Display the configuration of queue scheduling
profiles.
Display the queue scheduling profiles applied
to interfaces.
Command
system-view
qos qmprofile profile-name
•
Configure a queue to use SP:
queue queue-id sp
•
Configure a queue to use WRR:
queue queue-id wrr group
group-id { byte-count | weight }
schedule-value
•
Configure a queue to use WFQ:
queue queue-id wfq group
group-id { byte-count | weight }
schedule-value
bandwidth queue queue-id min
bandwidth-value
quit
interface interface-type
interface-number
qos apply qmprofile profile-name
Command
display qos qmprofile configuration [ profile-name ] [ slot
slot-number ]
display qos qmprofile interface [ interface-type
interface-number ]
56
Remarks
N/A
By default, no queue
scheduling profile exists.
By default, all queues use SP.
You can configure all queues
to use one queuing method or
different queuing methods
(WRR+WFQ is not allowed).
N/A
N/A
Only one queue scheduling
profile can be applied an
interface.