Download  Print this page

Congestion Management Configuration Task List; Configuring Queuing; Configuring Sp Queuing; Configuring Wrr Queuing - HP FlexFabric 5700 series Configuration Manual

Hide thumbs

Advertisement

Congestion management configuration task list

Tasks at a glance
(Required.)

Configuring SP queuing

Configuring WRR queuing

Configuring WFQ queuing
Configuring SP+WRR queuing
Configuring SP+WFQ queuing
(Optional.)
(Optional.)

Configuring queuing

Configuring SP queuing
Configuration procedure
To configure SP queuing:
Step
1.
Enter system view.
2.
Enter Ethernet interface
view.
3.
Configure SP queuing.
Configuration example
Configure Ten-GigabitEthernet 1/0/1 to use SP queuing:
# Enter system view
<Sysname> system-view
# Configure Ten-GigabitEthernet1/0/1 to use SP queuing.
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] qos sp
Configuring WRR queuing
Configuration procedure
To configure WRR queuing:
Configuring queuing
Configuring queue scheduling profiles
Setting the queue aging time
Command
system-view
interface interface-type
interface-number
qos sp
Remarks
Perform one of the tasks.
N/A
N/A
Remarks
N/A
N/A
The default queuing algorithm on an
interface is WRR queuing.
50

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: