SunStar KM-1070 SERIES User Manual page 14

4.5.4) Lap Switch
Attach the lap switch ① beneath the table ②
considering the user's working position with screws.
4.5.5) OP Panel
Fix the operating panel① to the bracket② using a
bolt③ and then fix it to the upper part of the rear arm
using a bolt④.
(Optional：Fix the OP bracket⑤ to the table face
using a tapping screw⑥.)
4.5.6) Control Box and LED Lamp SMPS
Attach the control box① and the LED lamp SMPS②
beneath the right side of the table③ using screws
and fix them at the places as in the figure.
14
[Fig. 4-8]
[Fig. 4-9]
[Fig. 4-10]