Paper Feeding; Input Data Buffer; Electrical Specifications - Epson Stylus 1500 Service Manual

Paper Feeding

Feeding method:
Note : Reverse feeding beyond 9.5 mm (0.38") is not allowed.
Line spacing:
Paper paths:
Feeding speed:

Input Data Buffer

Capacity:

Electrical Specifications

120 V Version
Rated voltage:
Input voltage range:
Rated frequency range:
Input frequency range:
Rated current:
Power consumption:
Insulation resistance:
Dielectric strength:
220 V Version
Rated voltage:
Input voltage range:
Rated frequency range:
Input frequency range:
Rated current:
Power consumption:
Insulation resistance:
Dielectric strength:
EPSON Stylus 1500 Service Manual
Friction feed with built-in auto sheet feeder (ASF)
and push tractor feed
1/6 inch, 1/8 inch, or programmable in units of 1/360 inch
Cut sheet front entry / front exit by ASF
Single sheet rear entry / front exit and continuous paper
rear entry / front exit
71 ms (1/6 inch)
3 inches/second (continuous feeding)
256KB
120 VAC
103.5 - 132 VAC
50 - 60 Hz
49.5 - 60.5 Hz
0.7 A
Approximately 23 W (self-test with 10 cpi LQ characters)
10 MΩ minimum (500 VDC between AC line and chassis)
1000 VAC RMS for 1 minute or 1200 VAC RMS for 1
second between AC line and chassis
220 - 240 VAC
198 - 264 VAC
50 - 60 Hz
49.5 - 60.5 Hz
0.4 A
Approximately 20 W (self-test with 10 cpi LQ characters)
10 MΩ minimum (500 VDC between AC line and chassis)
1000 VAC RMS for 1 minute or 1200 VAC RMS for 1
second between AC line and chassis
Printer Features
1-7