Onboard Failure Logging
Clearing OBFL Messages: Example
In the following example, all OBFL messages are cleared for all nodes in the system:
RP/0/RSP0/CPU0:router(admin)# clear logging onboard
Displaying OBFL Data: Example
The following example shows how to display uptime information from the OBFL feature:
RP/0/RSP0/CPU0:router(admin)# show logging onboard uptime detail location 0/7/cpu0
-------------------------------------------------------------------------------
UPTIME CONTINUOUS DETAIL INFORMATION (Node: node0_7_CPU0)
-------------------------------------------------------------------------------
The first record
The last record
Number of records
File size
Current reset reason : 0x00
Current uptime
-------------------------------------------------------------------------------
Time Stamp
MM/DD/YYYY HH:MM:SS | Users operation
-------------------------------------------------------------------------------
01/05/2009 01:44:35
-------------------------------------------------------------------------------
Where to Go Next
To configure alarm log correlation, see the Implementing and Monitoring Alarms and Logging Correlation
module in the Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide.
Additional References
The following sections provide references related to implementing logging services on Cisco IOS XR software
.
Related Documents
Related Topic
Logging services command reference
Onboard Failure Logging (OBFL) configuration
: 01/05/2009 00:58:41
: 01/17/2007916:07:13
:
478
:
15288 bytes
:
0 years
|
File cleared by user request.
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
0 weeks 0 days
3 hours
Document Title
Logging Services Commands module in the
Cisco ASR 9000 Series Aggregation Services Router
System Monitoring Command Reference
Onboard Failure Logging Commands module in the
Cisco ASR 9000 Series Aggregation Services Router
System Monitoring Configuration Guide.
Clearing OBFL Messages: Example
0 minutes
319