Table of Contents
Advertisement
Implementing IP Service Level Agreements
Command or Action
Step 12
exit
Example:
RP/0/RSP0/CPU0:router(config-ipsla-udp-echo)#
exit
RP/0/RSP0/CPU0:router(config-ipsla-op)# exit
RP/0/RSP0/CPU0:router(config-ipsla)# exit
RP/0/RSP0/CPU0:router(config)#
Step 13
ipsla schedule operation op-num
Example:
RP/0/RSP0/CPU0:router(config)# ipsla schedule
operation 432
RP/0/RSP0/CPU0:router(config-ipsla-sched)#
Step 14
life {forever | seconds}
Example:
RP/0/RSP0/CPU0:router(config-ipsla-sched)#
life 30
Step 15
ageout seconds
Example:
RP/0/RSP0/CPU0:router(config-ipsla-sched)#
ageout 3600
Step 16
recurring
Example:
RP/0/RSP0/CPU0:router(config-ipsla-sched)#
recurring
Step 17
start-time [hh:mm:ss {day | month day} | now |
pending | after hh:mm:ss]
Example:
RP/0/RSP0/CPU0:router(config-ipsla-sched)#
start-time 01:00:00
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
Configuring the IP SLA for a UDP Echo Operation
Purpose
Exits IP SLA operation configuration mode and IPSLA
configuration mode. Returns to global configuration mode.
Schedules the start time of the operation. You can configure a
basic schedule or schedule multiple operations using group
scheduling.
The forever keyword schedules the operation to run indefinitely.
The seconds argument schedules the lifetime of the operation,
in seconds. The default lifetime of an operation is 3600 seconds
(one hour).
(Optional) Specifies the number of seconds to keep the operation
in memory when it is not actively collecting information. The
default value of 0 seconds means that the operation never times
out.
(Optional) Specifies that the operation starts automatically at
the specified time and for the specified duration every day.
Specifies a time for the operation to start. The following
keywords are described:
• (Optional) Use the pending keyword to configure the
operation to remain in a pending (unstarted) state. The
default value is inactive. If the start-time command is not
specified, no information is collected until the start time
is configured or a trigger occurs that performs an
immediate start.
• (Optional) Use the now keyword to indicate that the
operation should start immediately.
• (Optional) Use the after keyword and associated arguments
to specify the time after which the operation starts
collecting information.
225
Advertisement
Table of Contents
