Suppressing Duplicate Syslog Messages; Disabling The Logging Of Link-Status Syslog Messages - Cisco ASR 9000 Serie Configuration Manuals

Suppressing Duplicate Syslog Messages

Command or Action
• service timestamps disable
• no service timestamps [debug | log]
[datetime [localtime] [msec]
[show-timezone]] | uptime]
Step 3 commit
Suppressing Duplicate Syslog Messages
This task explains how to suppress the consecutive logging of duplicate syslog messages.
SUMMARY STEPS
1. configure
2. logging suppress duplicates
3. commit
DETAILED STEPS
Command or Action
Step 1
configure
Step 2
logging suppress duplicates
Example:
RP/0/RSP0/CPU0:router(config)# logging
suppress duplicates
Step 3
commit

Disabling the Logging of Link-Status Syslog Messages

This task explains how to disable the logging of link-status syslog messages for logical and physical links.
When the logging of link-status messages is enabled, the router can generate a high volume of link-status
updown syslog messages. Disabling the logging of link-status syslog messages reduces the number of messages
logged.
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
302
Purpose
Both commands disable the inclusion of time stamps in
Note
syslog messages; however, specifying the service
timestamps disable command saves the command to the
configuration, whereas specifying the no form of the
service timestamps command removes the command from
the configuration.
Purpose
Prevents the consecutive logging of duplicate syslog messages.
If this command is enabled during debugging sessions,
Caution
you could miss important information related to problems
that you are attempting to isolate and resolve. In such a
case, you might consider disabling this command.
Implementing Logging Services