Enabling And Disabling Pm Threshold Monitoring Templates - Cisco ASR 9000 Serie Configuration Manuals

Implementing Performance Management
SUMMARY STEPS
1. configure
2. performance-mgmt thresholds {entity | interface {basic-counters |data-rates | generic-counters} type
interface-path-id } {template name } attribute operation value [value2] [percent] [rearm {toggle |
window window-size}]
3. commit
DETAILED STEPS
Command or Action
Step 1 configure
Step 2 performance-mgmt thresholds {entity | interface {basic-counters
|data-rates | generic-counters} type interface-path-id } {template
name } attribute operation value [value2] [percent] [rearm {toggle
| window window-size}]
Example:
RP/0/RSP0/CPU0:router(config)# performance-mgmt
thresholds node cpu template cpu_thresh1
RP/0/RSP0/CPU0:router(config-threshold-bgp)#
AverageCPUUsed GT 25 percent
Step 3
commit
What to Do Next
After creating a PM threshold monitoring template, you must enable the template to start PM threshold
monitoring. Refer to the
more information about enabling PM statistics threshold monitoring templates.

Enabling and Disabling PM Threshold Monitoring Templates

This task explains how to enable and disable PM threshold monitoring templates.
Before You Begin
You must create a PM threshold template before performing this task. Refer to
Monitoring Templates, on page 356
Enabling and Disabling PM Threshold Monitoring Templates, on page 357
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
Enabling and Disabling PM Threshold Monitoring Templates
Purpose
Creates a PM threshold monitoring template.
Note
tasks for more information.
For more detailed information about
creating PM threshold monitoring
templates, see the Guidelines for Creating
PM Threshold Monitoring Templates,
on page 337 section.
Creating PM Threshold
task for
357