Cisco ASR 9000 Serie Configuration Manuals page 350

PM Entity Instance Monitoring Overview
Table 38: BGP Entity Instance Monitoring
Entity
BGP
This table describes the commands used to enable entity instance monitoring for the interface entity instances.
Table 39: Interface Entity Instance Monitoring
Entity
Interface Data Rates
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
334
Command Description
Use the performance-mgmt apply monitor bgp command in global
configuration mode to enable entity instance monitoring for a BGP entity
instance.
Syntax:
performance-mgmt
ip-address
RP/0/RSP0/CPU0:router(config)# performance-mgmt apply monitor
bgp 10.12.0.4 default
Command Descriptions
Use the performance-mgmt apply monitor data-rates command in
global configuration mode to enable entity instance monitoring for an
interface data rates entity instance.
Syntax:
RP/0/RSP0/CPU0:router(config)# performance-mgmt apply monitor
interface data-rates gigabitethernet 0/2/0/0 default
Implementing Performance Management
apply monitor
bgp
template-name
default
| }
performance-mgmt
apply
monitor
interface
data-rates
type
interface-path-id template-name
{
default
}
|