Cisco ASR 9000 Serie Configuration Manuals page 229

Implementing IP Service Level Agreements
Command or Action
Step 4
destination address ipv4address
Example:
RP/0/RSP0/CPU0:router(config-ipsla-udp-jitter)#
destination address 12.25.26.10
Step 5
destination port port
Example:
RP/0/RSP0/CPU0:router(config-ipsla-udp-jitter)#
destination port 11111
Step 6 packet count count
Example:
RP/0/RSP0/CPU0:router(config-ipsla-udp-jitter)#
packet count 30
Step 7 packet interval interval
Example:
RP/0/RSP0/CPU0:router(config-ipsla-udp-jitter)#
packet interval 30
Step 8 frequency seconds
Example:
RP/0/RSP0/CPU0:router(config-ipsla-udp-jitter)#
frequency 300
Step 9 exit
Example:
RP/0/RSP0/CPU0:router(config-ipsla-udp-jitter)#
exit
RP/0/RSP0/CPU0:router(config-ipsla-op)# exit
RP/0/RSP0/CPU0:router(config-ipsla)# exit
RP/0/RSP0/CPU0:router(config)#
Step 10 ipsla schedule operation op-num
Example:
RP/0/RSP0/CPU0:router(config)# ipsla schedule
operation 432
RP/0/RSP0/CPU0:router(config-ipsla-sched)#
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
Configuring IP Service Levels Using the UDP Jitter Operation
Purpose
Specifies the IP address of the destination for the UDP jitter
operation.
Specifies the destination port number, in the range from 1 to
65535.
(Optional) Specifies the number of packets to be transmitted
during a probe. For UDP jitter operation, the range is 1 to
60000. For ICMP path-jitter operation, the range is 1 to 100.
The default number of packets sent is 10.
(Optional) Specifies the time between packets. The default
interval between packets is 20 milliseconds.
(Optional) Sets the rate at which a specified IP SLA operation
is sent into the network.
• (Optional) Use the seconds argument to specify the
number of seconds between the IP SLA operations. Valid
values are in the range from 1 to 12604800 seconds. The
default is 60 seconds.
Exits from IP SLA configuration mode and operational mode,
and returns the CLI to global configuration mode.
Schedules the start time of the operation. You can configure
a basic schedule.
213