Table of Contents
Advertisement
LSP Path Discovery
Command or Action
Step 6
path discover
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-ping)#
path discover
Step 7
echo interval time
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-lpd)#
echo interval 777
Step 8
echo maximum lsp selector ipv4 host address
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-lpd)#
echo maximum lsp selector ipv4 host_one
127.100.100.100
Step 9
echo multipath bitmap-size size
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-lpd)#
echo multipath bitmap-size 50
Step 10
echo retry count
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-lpd)#
echo retry 3
Step 11
echo timeout value
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-lpd)#
echo timeout 300
Step 12
path retry range
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-lpd)#
path retry 12
Step 13
path secondary frequency {both | connection-loss | timeout}
value}
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-lpd)#
path secondary frequency both 600
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
278
Implementing IP Service Level Agreements
Purpose
Enables LSP path discovery.
Configures the interval (in milliseconds) between
MPLS LSP echo requests sent during path discovery.
Range is 0 to 3600000. Default is 0.
Configures a local host IP address (127.x.x.x) that is
the maximum selector value to be used during path
discovery. Default is 127.255.255.255.
Configures the maximum number of selectors sent in
the downstream mapping of an MPLS LSP echo
request during path discovery. Range is 1 to 256.
Default is 32.
Configures the number of timeout retry attempts for
MPLS LSP echo requests sent during path discovery.
Range is 0 to 10. Default is 3.
Configures the timeout value for echo requests during
path discovery. Range is 0 to 3600 in milliseconds.
Default is 5.
Configures MPLS LSP path retry range. Range is 1 to
16. Default is 1.
Enables secondary frequency for:
• Both timeout and connection loss
• Only connection loss
• Only timeout
Advertisement
Table of Contents
