Maintenance; Scheduled Maintenance Table - Ice iS1100 Operator's & Parts Manual

MAINTENANCE

The lifespan of the machine and its maximum operating safety are ensured by proper and
regular maintenance.
The following table provides the scheduled maintenance. The intervals shown may vary
according to particular working conditions, which are to be defined by the person in charge of
the maintenance.
All scheduled or extraordinary maintenance procedures must be performed by qualified
personnel, or by an authorised Service Center.
This Manual describes only the easiest and most common maintenance procedures.
for other maintenance procedures shown in the Scheduled Maintenance Table, refer to the
Service Manual that can be consulted at any Service Center.
Warning! To perform maintenance procedures, the machine must be off on a
level surface, the ignition key removed, and, if necessary, the batteries must
be disconnected.
Read carefully the instructions shown in Safety chapter before performing
any maintenance procedure,

SCHEDULED MAINTENANCE TABLE

Procedure
WET battery fluid level check
Side and main brush height check and
adjustment
Dust filter cleaning and integrity check
Skirt height and operation check
filter shaker operation check
Main brush driving belt visual inspection
Nut and screw tightening check
Steering chain check and cleaning
Main brush driving belt replacement
Main motor and drive system motor carbon
brush check or replacement
(1) And after the first 8 running-in hours.
16
Every
Upon
10
delivery
hours
OPERATOR
Every Every Every
50 100 200
hours hours hours
(1)
ICE iS1100
Every
400
hours