Test Run - Grizzly T27961 Owner's Manual

Test Run

DO NOT start tool until all preceding
setup instructions have been per-
formed. Operating an improperly set
up tool may result in malfunction or
unexpected results that can lead to
serious injury, death, or tool/prop-
erty damage.
Serious injury or death can result
from using tool BEFORE under-
standing its controls and related
safety information. DO NOT operate,
or allow others to operate, tool until
information is understood.
-12
-
To test run tool:
1. Clear all setup tools away from sander.
2. Connect tool to power supply, and turn
machine ON (I) (see Figure 5). Verify
motor operation, then turn tool OFF
(O). Tool should run smoothly and
without unusual problems or noises.
3. Turn tool back ON and rotate variable-
speed control dial (see Figure 5)
back and forth to test variable-speed
function, then turn tool OFF.
Variable-Speed
Control Dial
Figure 5. Location of control switches.
Model T27961 (Mfd. Since 02/17)
ON/OFF Switch