Section 2: Introduction; Tool Description; Contact Info - Grizzly T27961 Owner's Manual

SECTION 2: INTRODUCTION

Tool Description

The Model T27961 Handheld Oscillating
Spindle Sander features variable-speed
dial control and comes equipped with four
different widths of sanding sleeves. This
sander has the ability to be used as a por-
table or fixed tool.
Foreword
We are proud to offer this manual with your
new Handheld Oscillating Spindle Sander!
We've made every effort to be exact with
the instructions, specifications, drawings,
and photographs of the spindle sander we
used when writing this manual. However,
sometimes we still make an occasional
mistake.
Also, owing to our policy of continuous
improvement, your spindle sander may not
exactly match the manual. If you find this
to be the case, and the difference between
the manual and spindle sander leaves you
in doubt, check our website for the latest
manual update or call technical support
for help.
For your convenience, we post all avail-
able manuals and manual updates for free
on our website at www.grizzly.com. Any
updates to your model of machine will be
reflected in these documents as soon as
they are complete.
-6
-

Contact Info

We stand behind our machines! If you have
questions or need help, contact us with the
information below. Before contacting, make
sure you get the serial number and manu-
facture date from the machine ID label. This
will help us help you faster.
Grizzly Technical Support
1815 W. Battlefield
Springfield, MO 65807
Phone: (570) 546-9663
Email: techsupport@grizzly.com
We want your feedback on this manual.
What did you like about it? Where could it
be improved? Please take a few minutes to
give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com
For Your Own Safety Read This Manual
Before Operating Spindle Sander
a) Wear eye protection.
b) Support workpiece on worktable.
c) Minimize pinch hazards. Use the smallest
table insert possible with sanding drum.
d) Avoid kickback. Feed workpiece against
rotation of drum.
e) Avoid entanglement with spinning drum.
Do not wear gloves, necktie, or loose
clothing. Tie back long hair.
Model T27961 (Mfd. Since 02/17)