Vertex Standard EVX-539 Operating Manual page 23

g s
roup can
The Scanning feature is used to monitor multiple
channels programmed into the transceiver. While
scanning, the transceiver will check each channel of
the programmed group for the presence of the signal,
and will stop on a channel if a signal is present.
Press, (or press and hold), the assigned PF key, the
display indicates "GRP SCAN" briefly, and activate
the scanning on the selected groups.
Press again, (or press and hold again), the assigned
PF key to disable the group scan mode. Operation
will revert to the programmed revert channel.
EVX-539 O M
pErating
a
dvancEd
anual
o
pEratIon
d W
ual atcH
The Dual Watch feature is similar to the SCAN fea-
ture, except that only two channels are monitored:
 The current operating channel; and
 The Priority-2 channel.
To activate Dual Watch:
 Press, (or press and hold), the assigned PF key.
The "DW" icon will be indicated on the display.
 The scanner will search the two channels; it will
pause each time it finds a channel on which some-
one is speaking.
To stop Dual Watch:
 Press, (or press and hold), the assigned PF key.
The "DW" icon disappear from the display.
 Operation will revert to the "Dual Watch Revert"
channel.
FCC ID: AXI11154620
IC: 10239A-11154620
21