Vertex Standard EVX-539 Operating Manual page 27

c
all
Press, (or press and hold), the assigned PF key to
send a 2-tone or 5-tone sequential tone.
s s
tatus Et
You can change the 5-tone status code using this
function:
 Press, (or press and hold), the assigned PF key to
change the 5-tone status code.
 Enter the 5-tone status code directly from the
keypad ([ 0 ] - [ 9 ] key ) .
 Press the [ D ] key to store the new number to the
5-tone status code.
s u /d
tatus p oWn
Press, (or press and hold), the assigned PF key to
select a 5-tone status code from the pre-defined status
list.
s c
tatus HEcK
Press, (or press and hold), the assigned PF key to
check the 5-tone receive status code. When you press
this key, the display will indicate the "Message" cor-
responding to the receive status condition per the pre-
defined status list.
EVX-539 O M
pErating
a
dvancEd
anual
o
pEratIon
d
utY
Press, (or press and hold), the assigned PF key
to toggle the Duty function of the 2-tone, 5-tone,
MDC1200 or Digital Call decoder "On" and "Off".
®
When the Duty function is set to "On", the display in-
dicates "DUTY ON" briefly and the user will always
hear (depending on the sub-audio signaling) all traf-
fic on the paging channel. The radio will sound the
paging alert when it receives the programmed 2-tone,
5-tone, MDC1200 or Digital Call code.
®
When the Duty function is set to "Off", the display
indicates "DUTY OFF" briefly and the user will
NOT hear normal radio traffic on the paging chan-
nel. The radio will sound the paging alert and unmute
only when it receives the programmed 2-tone, 5-tone,
MDC1200 or Digital Call code.
®
FCC ID: AXI11154620
IC: 10239A-11154620
25