Vertex Standard EVX-539 Operating Manual page 28

Id c
HEcK
This function allows logged ID of the DTMF Signal-
ing and 5-tone Signaling to be reviewed and relayed
(5-tone Signaling only) to a specific station:
 Press, (or press and hold), the assigned PF key to
display the logged ID of the DTMF Signaling and
5-tone Signaling.
 Press the [ A ] key to select the category ("DTMF
Signaling" or "5-tone Signaling") to be reviewed,
then press the SIDE-1/SIDE-2 buttons to select
the ID.
 Press the [ B ] key to toggle the display between
the "ID code display" and "Tag display".
 Press the [ C ] key to send the Call back, when
recalling the ID of the "5-tone Signaling", if de-
sired.
You may cancel the Call back sending by press-
ing the [ C ] key. In this case, the display indicates
"- CANCEL -" briefly.
26
a o
dvancEd pEratIon
arts l
This function enable the displaying the logged ID of
the MDC1200
 Press, (or press and hold), the assigned PF key
to display the number of the logged station of
the MDC1200
seconds, and then the display indicates the "ID
number" of the logged station.
 Press the SIDE-1/SIDE-2 buttons to indicate the
"ID number" of other stations, if needed.
 Press the [ C ] key to resume normal display.
ogIn
ARTS™ (or ARTSII™).
®
ARTS™ (or ARTSII™) for five
®
EVX-539 O
pErating
FCC ID: AXI11154620
IC: 10239A-11154620
M
anual