Connection Settings - D-Link DWM-312 User Manual

Section 4 - Con guration
Choose whether the DWM-312 should only use 4G networks, 3G
Prefer Service
networks, 2G networks, or use Auto Mode to automatically select
Type:
a network.
Enabling this option will allow you to connect when roaming
Allow Data
outside your carrier's home coverage.
Roaming:
Note: Roaming connections may incur additional fees from your
service provider.
Choose Always when you want to establish mobile connection all
Reconnect
the time. Choose Manual to only connect when you click Connect
Mode:
on the home screen. If you choose Connect-on-demand, the
device will establish a mobile connection when local users want to
connect to the Internet, and disconnect if there is no tra c after
the time period de ned by the Maximum Idle Time setting.
Note: These options are only available if SIMA Only has been
selected in WAN Service on page 15.
If you have chosen Connect-on-demand, enter the maximum idle
time before disconnection in seconds.
Maximum Idle
Time:
Specify IPv4, IPv6, or IPv4/IPv6 to determine what type of IP
address will be allocated by your ISP. This information should be
IP Type:
provided by your ISP.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWM-312 User Manual

Connection Settings

15