To Remove The Jack; To Secure The Jack - Mazda 3 2018 Owner's Manual

If Trouble Arises
Flat Tire
▼ Jack

To remove the jack

1. (4–Door)
Push the tabs and remove the cover.
(5–Door)
Turn the knob and remove the cover.
7-4
Mazda3_8GE4-EA-17F_Edition1
2. Turn the wing bolt and jack screw
counterclockwise.
Tabs

To secure the jack

1. Insert the wing bolt into the jack with
the jack screw pointing to the down
and turn the wing bolt clockwise to
temporarily tighten it.
2. Turn the jack screw in the direction
shown in the figure.
3. Turn the wing bolt completely to
secure the jack.
NOTE
If the jack is not completely secured, it
could rattle while driving. Make sure
the jack screw is sufficiently tightened.
2017-4-7 11:59:21