Mazda 3 2018 Owner's Manual page 475

Rear turn signal lights, Brake lights/
Taillights/Rear side-marker lights (Bulb
type)
4–Door
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Pull the center of each plastic retainer
and remove the retainers.
3. Remove trunk end trim.
Removal
Installation
4. Pull the center of each plastic retainer
and remove the retainers.
5. Peel back the trunk side trim.
Mazda3_8GE4-EA-17F_Edition1
6. Turn the socket and bulb assembly
Removal
Installation
Maintenance and Care
Owner Maintenance
counterclockwise and remove it.
Rear turn signal lights
Brake lights/Taillights/Rear
side-marker lights (Bulb type)
6-47
2017-4-7 11:59:21